Buying Guide for Waste Residue Fly Ash Mills|Fly Ash Grinding Mill Machine

As the fine ash in the flue gas after combustion in coal-fired power plant, waste slag fly ash is mainly composed of SiO2, Al2O3, FeO, Fe2O3, Cao, TiO2, etc. After being treated by HLMX super-fine vertical grinding mill, it is applied to construction engineering, municipal transportation engineering, sponge city construction and other fields. 3000 mesh activated silicon is made from waste slag and fly ash, and the selling price can reach 3000-4000 yuan per ton.

The waste residue and fly ash processing production line is mainly composed of crushing, grinding, collection and other equipment. Among them, grinding equipment is the most important link in the processing and utilization of waste slag and fly ash. The quality of pulverizing equipment directly affects the quality, production efficiency, energy conservation and environmental protection of fine powder produced from waste slag and fly ash.

HCMilling(Guilin Hongcheng)Superfine waste residue and fly ash processing equipment -- HLMX Superfine Vertical Grinding Mill

1. High output per hour, low power consumption and low energy consumption, and low valley power can be used;

2. The control technology adopts PLC automatic control system with high degree of automation, remote control and video monitoring can be realized, and the operation is simple. The workshop can basically realize unmanned operation and save operation cost;

3. The grinding spoke can be turned out of the machine with the turnover device. The replacement of the rolling sleeve lining plate and the maintenance space of the mill are large, and the maintenance operation is very convenient;

4. There is no need to distribute cloth on the grinding plate before starting up, and the mill can be started without load to avoid the trouble of starting up;

5. Simple process operation, preheating, grinding and lifting in one, short process and small land occupation;

6. Strong self-protection, equipped with reducer, thin oil station, hydraulic station, grinding lubrication, water spraying device and other auxiliary facilities;

7. Material grinding is carried out under variable pressure;

8. Dynamic and static powder selection can adjust the product quality and have higher grinding efficiency;

9. Small amount of maintenance, small wear parts and easy maintenance;

10. The lower shell of the vertical mill is provided with a slag discharge port, so that the foreign matters difficult to grind can be discharged out of the machine at any time, and all the residues can be emptied after shutdown;

11. The grinding spoke can be turned out of the mill for maintenance with the help of hydraulic spoke turning device. It only takes 12-24 hours to replace easy grinding parts, which improves the operation rate of the mill;

12. The grinding rod and shell adopt arc plate sealing structure, which has the characteristics of good sealing effect and durability compared with the traditional structure;

13. Stable product quality, uniform particle shape and narrow particle size distribution;

To sum up, HCM's waste residue fly ash is a trusted big brand. Waste residue fly ash can be used as part of the substitutes for carbon black, calcium carbonate, talc powder and kaolin, as well as the substitutes for high-voltage cable fillers. It has a wide range of uses and far-reaching market prospects.

If you are in need of fly ash grinding mill, contact mkt@hcmilling.com or call at +86-773-3568321, HCM will tailor for you the most suitable grinding mill program based on your needs, more details please check www.hcmilling.com.