What Is The Use Of Granite Grinding Powder? The Method of Using Granite Grinding Mill to Produce Antique Bricks

Granite plate is a high-quality construction material, widely used in the masonry and decoration of high-end and luxury buildings and structures. With the development of modern architecture, the demand for granite slabs has increased rapidly, further driving the mining and processing of granite. However, due to the traditional production methods used in the mining of granite resources, the yield of stone materials is only about 25%, and the backward mining technology has led to the production of a large amount of granite leftover materials and the production of a large amount of stone powder and slurry during the processing process. So, what is the use of these granite grinding powders? HCMilling(Guilin Hongcheng) is a manufacturer of granite grinding mill machine. Below is an introduction to the application of a granite grinding mill: a method for using granite grinding mill machines to produce antique bricks.

Archaize tiles belong to ordinary ceramic tiles, which are basically the same as ceramic tiles, but the only difference is that during the firing process, archaize tiles imitate the previous styles and are made old, essentially glazed ceramic tiles. Traditional ceramic production generally uses potassium sodalite powder extracted from albite ore as raw material, but albite ore only occurs in some regions, and its existence is very limited, resulting in very poor raw material resources for ceramic production, high freight costs, and high production costs. Using granite waste to produce antique bricks not only solves the problem of granite waste polluting the local environment, turning granite waste into treasure, but also provides a new raw material for ceramic production.

The method of using granite grinding mill machines for the production of antique bricks is to use granite waste and some local unique raw materials (such as feldspar with specific iron and silicon content, sand with specific iron content, clay with specific iron and aluminum content, and red clay) as one of the raw materials for the production of antique bricks, The production process of antique bricks is adopted, including blank preparation (material proportioning → granite grinding mill machine → milling) → glaze preparation (material proportioning → granite grinding mill → milling) → press molding → glaze printing → firing, edging, and other production processes. This method has the advantages of rich raw material resources and low cost compared to using potassium sodalite powder extracted from albite ore as raw material. The waste generated during the mining process of granite, as well as the stone powder and slurry generated during the processing process, are used as one of the raw materials for manufacturing antique bricks. The raw materials are ground to about 250 meshes using agranite grinding mill, which solves the problem of serious environmental pollution and resource waste caused by the discharge of a large amount of granite waste, not only achieving the goal of waste utilization and beautifying the environment, but also providing a new type of raw material for ceramic production.

HCMilling(Guilin Hongcheng) is a manufacturer of granite grinding mill. Our granite grinding mill machines, such as granite Raymond mill and granite vertical grinding mill machine, have been widely used in the utilization of granite waste. It provides good equipment support for turning granite waste into treasure, and can process 80-2500 mesh granite powder. If you have any purchase requirements for granite grinding mill machines, please contact mkt@hcmilling.com or call at +86-773-3568321, HCM will tailor for you the most suitable grinding mill program based on your needs, more details please check www.hcmilling.com. Our selection engineer will plan scientific equipment configuration for you and quote for you.