Production Process Of Pyrophyllite Grinding Mill Equipment |Pyrophyllite Vertical Mill For Sale

Pyrophyllite is a non-metallic mineral with high economic value, which has a wide range of applications. Processing pyrophyllite into micro powder has significant economic benefits. HCMilling(Guilin Hongcheng), as a manufacturer of pyrophyllite vertical mill, will introduce the production process of pyrophyllite grinding mill equipment to you in the following text. The pyrophyllite micropowder prepared by the method has stable composition, small fluctuation and high production efficiency, and is suitable for mass production of pyrophyllite micropowder.

HLM pyrophyllite vertical mill

Pyrophyllite is an important raw material for manufacturing glass fiber. Due to the rapid development of glass fiber industry, the demand for pyrophyllite is growing, especially for the uniformity and batch size of pyrophyllite powder. At present, pyrophyllite is mainly grinded by the pyrophyllite Raymond mill production line. The processing technology has the following disadvantages: 1. Due to the structure of Raymond mill, its processing efficiency in unit time is low and the processing batch is small, which is difficult to meet the demand of large batch; 2. Due to the different origins of pyrophyllite ores, their compositions are quite different. Even different batches of pyrophyllite ores mined from the same mine will also have composition fluctuations. The existing production line is simply crushing and grinding pyrophyllite, which will lead to large fluctuations in the composition of pyrophyllite micropowder, and ultimately lead to instability in the quality of glass fiber products. On this premise, HCMilling(Guilin Hongcheng) combines years of experience in the development and manufacturing of grinding mills, and based on the existing vertical grinding process, has developed and transformed a new HLM pyrophyllite vertical mill - a dedicated pyrophyllite vertical mill, and has successfully operated in the market. This article will provide you with a specific introduction to the production process of pyrophyllite grinding mill equipment, and compare and analyze the process of pyrophyllite Raymond mill.

Production process of pyrophyllite grinding mill equipment:

1) The pyrophyllite ores from different places of origin or different batches are sampled and tested for their composition, and the mixing proportion is determined according to the tested composition, which is sent to the crusher for pre mixing and coarse crushing;

2) Send the coarsely crushed ore to the storage warehouse and test the composition of the ore in each storage warehouse, which is equipped with an automatic batching device;

3) According to the composition control of the ore in each storage warehouse detected in step 2, the automatic batching device is used to automatically weigh, mix, and continuously feed the matched ore into a vertical mill for grinding;

4) Send the qualified powder milled in step 3 into the pneumatic homogenizing bin. The pneumatic homogenizing bin is equipped with a pneumatic homogenizing device. The powder can be fully homogenized in the pneumatic homogenizing bin to produce the required pyrophyllite micropowder.

The production process of pyrophyllite grinding mill equipment pyrophyllite vertical mill is to pre mix and match ores with different ingredients according to the requirements of micro powder finished products before coarse crushing and grinding, so as to realize the dynamic control of ingredients in production and significantly improve the uniformity and stability of the ingredients of pyrophyllite micro powder finished products, prevent the fluctuation of their ingredients, and ensure the quality of subsequent production of glass fibers; The grinding process is completed using a vertical mill, and the pyrophyllite vertical mill has the advantages of high grinding efficiency and large output compared to the previously used HC pyrophyllite Raymond mill. Multiply the processing batch size, and the product processing fineness is easy to adjust, with low noise, small footprint, and convenient maintenance; Finally, the pyrophyllite fine powder after vertical grinding of pyrophyllite is sent to the pneumatic homogenizing bin for pneumatic homogenization, so that the pyrophyllite fine powder can be fully mixed, which can further improve the quality uniformity of the finished product.

If you have any process requirements for the production of pyrophyllite grinding mill equipment, please contact HCMilling(Guilin Hongcheng) to learn more. Please contact mkt@hcmilling.com or call at +86-773-3568321, HCM will tailor for you the most suitable grinding mill program based on your needs, more details please check www.hcmilling.com. Our selection engineer will plan scientific equipment configuration for you and quote for you.