Welcome to Guilin HCM Machinery Official WebSite! facebookfacebook linkedinlinkedin Mobile siteMobile site

What is the price of building a production line of potash feldspar grinding mill equipment?

Author: guilin hong cheng        Views: 5        Release date: 2020-06-27 14:09:32

As a professional grinding mill equipment manufacturer, HCMilling(Guilin Hongcheng) is an equipment manufacturer with rich experience, superb technology and customized selection and configuration scheme. We supply Raymond mill, ultrafine mill, vertical roller mill, superfine vertical grinding mill and other equipment.


What is potash feldspar?

Potash feldspar, also known as orthoclase, belongs to monoclinic system. It is usually flesh red, white or gray. Density 2.54-2.57g/cm, specific gravity 2.56-2.59g/cm3, hardness 6. It has the characteristics of low melting point (1150 ± 20 ℃), long melting interval and high melting viscosity. It is widely used in industrial sectors such as ceramic blank, ceramic glaze, glass, electric porcelain and grinding materials, and in the production of potash fertilizer.


In order to meet the grinding demand of potash feldspar ore powder, HCMilling(Guilin Hongcheng) provides customers with a variety of grinding machines and equipment, which can meet the production demand of 80-2500 mesh grinding fineness.


Introduction of the equipment for grinding potash feldspar

As a professional mill equipment manufacturer, there are many types of mill equipment produced by Guilin Hongcheng. Superfine grinding machine is a special equipment in the field of fine powder deep processing, which is also the main equipment discussed in this paper.


Hongcheng's ultra-fine grinding machine has comprehensive mechanical properties of rolling, grinding and impact. The fineness of grinding powder can be between 325-2500 mesh, which is an energy-saving grinding equipment for fine powder processing, economical and practical. Its advantages are as follows:


1) Large crushing ratio and high energy utilization rate


The utility model has the advantages of low consumption in the production of powder by high-speed impact crusher, and the fineness of the product close to the air flow mill.


2) Grading fineness: uniform and fine

It adopts the forced turbine classification system, with uniform and fine particle size, so that the fineness of the finished product can be easily adjusted between 0.04mm (400 mesh) and 0.005mm (2500 mesh).


3) Dust collection efficiency up to 99%

It adopts the full pulse dust collection system, with the efficiency of 99%, and the kinetic energy of ash cleaning is higher and more thorough. It is a technology developed to meet the requirements of environmental protection.


4) Less abrasion, less vibration and more compact structure

The grinding wheel and ring are made of special wear-resistant steel, which improves the service life. The base of the main engine adopts the integral casting structure, which not only ensures the structural strength, but also has good shock absorption performance.


How much does the superfine mill cost?

How much does it cost to build a potassium feldspar grinding mill? HCMilling(Guilin Hongcheng) factory provides customized service. According to the production demand of potash feldspar powder project, it can provide one-to-one exclusive selection and configuration scheme. The complete system of ultrafine mill of HCM is mainly composed of main machine, feeder, classifier, blower, pipeline device, storage hopper, electric control system, collection system, etc. We combined with the grinding demand of the project, customized reasonable production line solutions for customers, and the price of the superfine grinding machine equipment supplied is more ideal.


HCMilling(Guilin Hongcheng) has professional potassium feldspar grinding mill equipment for customers to choose. Ultrafine mill, Raymond mill, vertical roller mill and other equipment can meet the production demand of different fineness. Welcome new and old customers to choose the ideal grinding mill equipment and production line solutions to create value for the project. Please contact:


E-mail: mkt@hcmilling.com

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a Hongcheng representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).

Name :
* E-mail:
Contact Tel :
Company :
Question :




For product information and pricing, chat with sales agent: SERVICES ONLINE >

Fill in this form or click the service online, all questions will be answered.

Request for Quotation


TEL: +86-0773-3568321
FAX: +86-0773-3568987
Email: mkt@hcmilling.com