Kaolin milling machine: the application of Kaolin powder in China

Kaolin milling machine manufacturers Hong Cheng introduced the application of kaolin powder in China, kaolin powder has wide range of applications in the paper industry, ceramic industry, rubber industry and the plastics industry.

In paper industry: The kaolin international market is relatively prosperous; its sales amount is more than ceramics, rubber, paint, plastics, refractories and other industries. In pulp, the kaolin usually does not react with its ingredients, has strong stability, and can remains intact in the paper fibers. Also kaolin’s fine particle size, fluidity ensures uniform thickness of paper coating in mechanized production. Because of the above properties, kaolin is generally used as paper filler and coating materials in the production process.

In Ceramic Industry: The application of kaolin is earlier than other industries, the amount is also very large, usually can be accounted for 20% to 30% in formula. Kaolin can increase the content of Al2O3, makes the mullite formation process easier, thus improving the stability of the ceramic and sintering strength. In addition, the ceramic process requires specifically in chemical properties of kaolin, particle size and degree of crystallization, in order to ensure the quality of ceramic processing, parameters of kaolin should be strictly controlled in the industry.

In Refractory Industry: Because of its high refractoriness, usually used in the production and processing refractory products. Refractories are mainly divided into two types of refractory bricks and silicon aluminum cotton, with characteristics of high temperature and withstand pressure deformation. Kaolin, bauxite, bentonite, etc., a series of high-temperature resistance clay are all collectively referred as refractory clay. Some of them with lower whiteness which cannot be used in process ceramics and paper but they are good refractory materials of high quality raw materials. Therefore, how to comprehensively develop and utilize kaolin, improve its utilization rate, and create an important market of refractory clay and refractory has become a new topic of people's attention.

Kaolin in Rubber Industry: The kaolin used in the rubber industry, filled into the colloidal mixture, can enhance the abrasion resistance, chemical stability and mechanical strength of the rubber, extend its hardening time, can also adjust the rubber mixing, rheology, vulcanization, Vulcanized products, viscosity, to prevent the collapse of soft, depression, sag, flat tube, deformation and so on. Its rubber products have great improvement in permeability, water resistance, chemical activity, fire and other characteristics. At the same time, kaolin can also reduce the amount of other raw materials, greatly reducing the cost of rubber while does not significantly affect the performance of rubber.

Guilin Hongcheng non-metallic mineral mill --Kaolin milling machine

【Feeder size】: 50mm

【Fineness of the powder】: 100-325 mesh

【Capacity】: 85-730t/h

【Application area】: Non-flammable and explosive materials with Mohs hardness of 7 or less in the areas of building materials, chemical industry, metallurgy, coating, papermaking, rubber, medicine and food.

Applicable materials: bauxite, kaolin, barite, fluorite, talc, water residue, ash calcium powder, wollastonite, gypsum, limestone, phosphate, marble, feldspar, quartz sand, bentonite, manganese Mohs hardness of 7 and the like.