What Size Raymond Mill Is Used To Produce Two Tons Per Hour? What Is The Price Of A Small Raymond Mill?

How much Raymond mill is used for two tons per hour? How to choose? What's the price of 2 tons of Raymond mill? How to calculate the processing cost? These problems are of concern to many customers. HCMilling(Guilin Hongcheng) has been in Raymond mill industry for more than 30 years. It is a Raymond mill manufacturer integrating R & D, production and sales. We have many years of R & D and production experience and have our own independent brand Raymond mill. Among them, Raymond mill types include R-type traditional Raymond mill, HCQ small Raymond mill, HC pendulum Raymond mill and HC large Raymond Mill Series Raymond mill. Next, HCMilling(Guilin Hongcheng) will answer the above questions about the output, price and cost of Raymond mill.

The common processing materials of Raymond Mill include various non-metallic ores, such as calcite, limestone, dolomite, marble and other ores with hardness no more than Grade 7. There are also more than 200 kinds of materials in mineral and chemical industries such as activated carbon, pulverized coal and titanium dioxide. The feeding particle size is 0-3cm, and the discharging fineness is in the range of 80-400 mesh. So, how big is the Raymond mill for two tons per hour?

From the perspective of materials, the output of Raymond mill is mainly affected by material characteristics, feed particle size and discharge fineness. Generally speaking, the hardness and fineness of materials are inversely proportional to the output. The higher the hardness and fineness of materials, the smaller the output. However, it is not that the lower the hardness of the material, the better the grinding. For the principle of Raymond grinding, too soft materials are easier to process than hard materials. The characteristics of the material itself will also affect the output. For example, titanium dioxide will have viscosity when grinding. If the Raymond mill is not technically improved, titanium dioxide will be bonded to the grinding roller ring during grinding. Therefore, the output will become smaller, and even cause serious damage to the equipment. When the feed particle size is 3cm, the output will also be relatively high. If the feed fine powder content is high, the output will also be relatively affected.

From Raymond mill itself, the configuration level will make the same type of equipment have different production capacity effects. The motor power, number of grinding rollers and fan size of Raymond mill can be selected. Through more scientific configuration, Raymond mill can achieve higher production efficiency under the configuration of high cost performance.

The Raymond mills of model 2R / 3R /HCQ1290 / HC1000 of HCMilling(Guilin Hongcheng) belong to small Raymond mills. For common materials, the hourly capacity range is about 1-6 tons, which is more suitable for the small capacity demand of two tons per hour. However, the specific selection needs to know what the material is, how big the particle size of the raw material is and how fine the discharge is, so as to more accurately recommend the model of Raymond mill. The price and cost are the same. The more detailed the project information provided, the more conducive it is for engineers to select and configure. After selecting the model configuration, the price and cost can be accurately calculated. HCM team can be consulted for the selection of two ton Raymond mill per hour. We will scientifically configure Raymond mill with higher cost performance for you.

If you are in need of any non-metallic grinding mill, contact mkt@hcmilling.com or call at +86-773-3568321, HCM will tailor for you the most suitable grinding mill program based on your needs, more details please check www.hcmilling.com.